Hi everybody,
I'm getting ready to give the motor its first 100k service "08 Raging Bull"!!!
is it just a normal oil & filter change??? or considering this is a landmark 100k are there any specials I need to take care of???
all advice will be greatly appreciated
Thanks,
Cass.
Raging Bull 2.5DiD 22" Alloys Checker Plate in the rear
Posts: | 5 |
Date registered | 05.15.2014 |
Don't think its cambelt, think thats every 62500 on the new shape, always worth checking though.....I think it would depend very much on your previous service history/servicing
Thread locking available here...no fee!
Moderator
Posts: | 11.226 |
Date registered | 11.09.2012 |
I think it may be tappets and EGR clean too, I think @Nick will know
SOUTHWEST ENGLAND - AREA REP
2003 4life now sold
2011 walkinshaw , lego mechanic
Posts: | 17.335 |
Date registered | 10.21.2011 |
Thanks Krutly & Ronniecabers,
I changed the timingbelt @ 65k
had to put a new EGR in @ around 78k
and changed the fuel filter @ 90k "this sorted out the limp mode problem I was having"... so are the tappets troublesome??
Raging Bull 2.5DiD 22" Alloys Checker Plate in the rear
Posts: | 5 |
Date registered | 05.15.2014 |
I dont think it's a big deal with the tappets, perhaps @Basil may be able to confirm as I'm sure his are just about due for adjustment
SOUTHWEST ENGLAND - AREA REP
2003 4life now sold
2011 walkinshaw , lego mechanic
Posts: | 17.335 |
Date registered | 10.21.2011 |
Quote: casperhacket wrote in post #1
Hi everybody,
I'm getting ready to give the motor its first 100k service "08 Raging Bull"!!!
is it just a normal oil & filter change??? or considering this is a landmark 100k are there any specials I need to take care of???
all advice will be greatly appreciated
Thanks,
Cass.
did have warrior, but crossed over to disco 2.
Thought I could see light at the end of the tunnel, but it was somebody with a torch bringing more work!
Landies don't leak oil, they just sweat
Posts: | 5.813 |
Date registered | 10.06.2011 |
Tappets are quite a big job from memory, both inlet and exhaust manifold have to come off, I'm sure there is a write up on here somewhere.
2007 Animal in grey
93k
Belts done @ 62.5k
Reversing camera - broke
265/75/16 BFG AT's on black modulars.
Posts: | 829 |
Date registered | 10.30.2011 |
Found it
New shape, tappets adjustment http://www.l200forum.com/t13267f30-New-shape-tappets-adjustment.html
2007 Animal in grey
93k
Belts done @ 62.5k
Reversing camera - broke
265/75/16 BFG AT's on black modulars.
Posts: | 829 |
Date registered | 10.30.2011 |
went into the stealers last week to price 62k service - to inc all fluids, tappet check (if theyre ok, they dont do anything) £550 plus vat! then at 62k miles, cambelt change - £390 plus vat ! no reduction if both done at once as one is from above, the other from the front - fecked from all directions!
2007, Y plate 4life,
2010, 55 plate L200 4work++
March 2013, 11 plate Barbarian. Wrapped, OME all round, remapped to 210, straight piped 2.5" SS.
Posts: | 12.392 |
Date registered | 03.07.2012 |
What if you supply the parts from our friendly neighbourhood suppliers... Might drag down those atrocious main line price tags? or is your warranty/lease fooked if you don't use Mitsi bits?
Probably the least effective ever AREA REPRESENTATIVE: South East England
'93 Strada double cab, broken... 5 years off the road, list of things to repair just about getting shorter!
'94 Strada double cab 'parts truck'... too good to break?
Posts: | 3.784 |
Date registered | 01.22.2012 |