Train Horn equipped L200!

#26 by maca4x4 , Sun Jan 18, 2015 7:51 pm

love them hornblasters,,seen a few sets on ebay new and complete but out of my price range so i will settle for watching them scare people on utube ,,good read up thou

#27 by Antonio , Sun Jan 18, 2015 8:47 pm

Great job, intresting not seen an install like that before....

#28 by 123hotchef , Sun Jan 18, 2015 8:55 pm

what kinda compressor u got running the install mate

#29 by Admin , Sun Jan 18, 2015 8:58 pm

Something tells me that Hornstar is going to be a very bad influence on some of the other forum members

#30 by Hornstar , Sun Jan 18, 2015 9:00 pm

Quote: 123hotchef wrote in post #28
what kinda compressor u got running the install mate

2 x 400c Viair compressors mounted & bolted on the rear chassis rails. I use two as the rule of thumb says one 400c per 5 Gallon air tank, mine is 8.5 gallons. With the two it recharges from 110psi to 150psi in about 30secs roughly.

#31 by 123hotchef , Sun Jan 18, 2015 9:02 pm

sweet was thinking about a onboard compressor and tank for off road purposes tools and infalting tyres air horns could be a bonus as

#32 by Hornstar , Sun Jan 18, 2015 9:02 pm

Quote: Admin wrote in post #29
Something tells me that Hornstar is going to be a very bad influence on some of the other forum members

HAHAHAHAHAHAHAHAHAHAHA I most certainly hope so, lol

#33 by Mallinman , Sun Jan 18, 2015 9:03 pm

That's brill mate. I love your obsession with the train horns. That's very unique.
Love the engineering work 2. 👍👍

#34 by Hornstar , Sun Jan 18, 2015 9:06 pm

Quote: 123hotchef wrote in post #31
sweet was thinking about a onboard compressor and tank for off road purposes tools and infalting tyres air horns could be a bonus as

Just let me know I will find out a price on a on board air system. They do one with the compressor built on top of the tank & every thing else is included, simply screw in a male PCL connector, fit a pair of crocodile clips and away you go.

#35 by 123hotchef , Sun Jan 18, 2015 9:08 pm

no croc clips lol i will install and hard wire it in properly

#36 by Tony2chins , Sun Jan 18, 2015 9:12 pm

Quote: 123hotchef wrote in post #35
no croc clips lol i will install and hard wire it in properly

Tut tut tut it will sit on his garage floor for at least 6 months

#37 by Hornstar , Sun Jan 18, 2015 9:12 pm

Very similar to this one. (Sorry, I know this could be construed as blatant advertising, which is not my intention, honest)

#38 by 123hotchef , Sun Jan 18, 2015 9:14 pm

so that is just a 12v comp and a 5L tank

#39 by Hornstar , Sun Jan 18, 2015 9:21 pm

Quote: 123hotchef wrote in post #38
so that is just a 12v comp and a 5L tank

That one is basically a 2gallon tank & if my memory serves me right is a 280c Viair.

I'm guessing due to the size of our tyres, you'd be looking at a 5gallon tank with a 400c or 480c. You have to take into account the duty cycle of a compressor. (Length of time it can be run without resting it.

#40 by Hornstar , Sun Jan 18, 2015 9:22 pm

Quote: 123hotchef wrote in post #38
so that is just a 12v comp and a 5L tank

And yeah 12v though I can get 24v Viair's.

#41 by surfer , Sun Jan 18, 2015 9:25 pm

Quote: Tony2chins wrote in post #36
Quote: 123hotchef wrote in post #35
no croc clips lol i will install and hard wire it in properly

Tut tut tut it will sit on his garage floor for at least 6 months

Then he will lose it,post a pic to find it
You all know the rest

Al

#42 by 123hotchef , Sun Jan 18, 2015 9:28 pm

no chance of running air tools off of it then is there

#43 by 123hotchef , Sun Jan 18, 2015 9:28 pm

Quote: surfer wrote in post #41
Quote: Tony2chins wrote in post #36
Quote: 123hotchef wrote in post #35
no croc clips lol i will install and hard wire it in properly

Tut tut tut it will sit on his garage floor for at least 6 months

Then he will lose it,post a pic to find it
You all know the rest

Al

#44 by Hornstar , Sun Jan 18, 2015 9:31 pm

Quote: 123hotchef wrote in post #42
no chance of running air tools off of it then is there

Yep every chance, but not for continued long use etc etc, you'd need a lot of air for that really, I'd imagine it would be ok for the odd wheel nut removal etc etc

#45 by 123hotchef , Sun Jan 18, 2015 9:35 pm

i will look into this more, i had a mate who used the aircon compressor to fill the tank

#46 by surfer , Sun Jan 18, 2015 9:41 pm

Bild entfernt (keine Rechte)

@123hotchef

Al

#47 by 123hotchef , Sun Jan 18, 2015 9:43 pm

nice one thanks Al

#48 by Hornstar , Sun Jan 18, 2015 9:53 pm

Quote: surfer wrote in post #46

@123hotchef

Al

Roughly 1.7gallons.

#49 by 123hotchef , Sun Jan 18, 2015 9:57 pm

25L would be better and ther is pleanty of room under the truck for that I reakon

#50 by Hornstar , Mon Jan 19, 2015 7:55 am

Quote: 123hotchef wrote in post #49
25L would be better and ther is pleanty of room under the truck for that I reakon

Yeaaaahhhh should be, but the spare wheel does take up a fair bit of the room.

150 PSI
Burst Pressure
800 PSI
Length
20.5 in (520.7 mm)
Diameter
9.5 in (241.3 mm)
Height
11.5 in (292.1 mm) (With Legs)
Weight
20 lbs (9.07 Kg)

Posts:	1.236
Date registered	11.12.2013

Posts:	1.876
Date registered	04.21.2014

Posts:	34.244
Date registered	02.15.2012

Posts:	9.552
Date registered	12.19.2011

Posts:	766
Date registered	01.10.2015

RE: Train Horn equipped L200!

RE: Train Horn equipped L200!

RE: Train Horn equipped L200!

RE: Train Horn equipped L200!

RE: Train Horn equipped L200!

RE: Train Horn equipped L200!

RE: Train Horn equipped L200!

RE: Train Horn equipped L200!

RE: Train Horn equipped L200!

RE: Train Horn equipped L200!

RE: Train Horn equipped L200!

RE: Train Horn equipped L200!

RE: Train Horn equipped L200!

RE: Train Horn equipped L200!

RE: Train Horn equipped L200!

RE: Train Horn equipped L200!

RE: Train Horn equipped L200!

RE: Train Horn equipped L200!

RE: Train Horn equipped L200!

RE: Train Horn equipped L200!

RE: Train Horn equipped L200!

RE: Train Horn equipped L200!

RE: Train Horn equipped L200!

RE: Train Horn equipped L200!

RE: Train Horn equipped L200!