4D56 Front Crank Seal
#1 by
EasyManHugo
, Fri Jan 23, 2015 1:54 pm
Hi There
Anybody done a front Crank Seal. Have already had a go but it's still leaking. Don't have any special tools so positioned the seal squarly then put the pully on to force it home seemed to work at the time but is still leaking. Any ideas on how it can be done by the DIY mechanic.
Many Thanks
EMH
- EasyManHugo
-
Posts: 25 Date registered 10.15.2014
RE: 4D56 Front Crank Seal
#2 by
123hotchef
, Fri Jan 23, 2015 1:56 pm
no idea mate I am sure someone will be along later with some knowledge on it
AREA REPRESENTATIVE: South East England
'PYROCHEF'
- 123hotchef
- Forum Legend
-
Posts: 34.248 Date registered 02.15.2012
RE: 4D56 Front Crank Seal
#3 by
Antonio
, Fri Jan 23, 2015 2:34 pm
Bild entfernt (keine Rechte)Bild entfernt (keine Rechte)Bild entfernt (keine Rechte)Bild entfernt (keine Rechte)
@EasyManHugo
Hi bud was gonna post it tonight, ye beat me to it...
Don't think you where far off doing it first time, maybe it didn't go all the way and sit properly or nipped on way in the way you did it,(check seal bore for damage if you take it off again mate) hope this helps.
FORUM AREA REPRESENTATIVE - North East England - Lincolnshire
1998 twin cab, import,3" Full chrome bars/spots all round, tints,deflectors, 2.5" suspension lift, 2.5" body lift, polly bushes, rear diff lock, 33"x12.5" KL71 tyres on 15"x10" rims.
Snorkel........OH!! and lots of rust.
1991 Pajero 2.5td SWB, import
1996 Pajero 2.8td LWB, import
NEXT MODS
CB radio
Front Winch plate+winch
Airbrush bodywork
- Antonio
-
Posts: 1.876 Date registered 04.21.2014
RE: 4D56 Front Crank Seal
#4 by
Antonio
, Fri Jan 23, 2015 2:45 pm
Just to let you know I got the info from Haynes Pajero manual covers 4D56 engine, on sale at The Range in Scunthorpe at £4.99!!
Had a few in stock if you happen to pass buy.
Bild entfernt (keine Rechte)
Bild entfernt (keine Rechte)
FORUM AREA REPRESENTATIVE - North East England - Lincolnshire
1998 twin cab, import,3" Full chrome bars/spots all round, tints,deflectors, 2.5" suspension lift, 2.5" body lift, polly bushes, rear diff lock, 33"x12.5" KL71 tyres on 15"x10" rims.
Snorkel........OH!! and lots of rust.
1991 Pajero 2.5td SWB, import
1996 Pajero 2.8td LWB, import
NEXT MODS
CB radio
Front Winch plate+winch
Airbrush bodywork
- Antonio
-
Posts: 1.876 Date registered 04.21.2014
RE: 4D56 Front Crank Seal
#5 by
Rob1307
, Fri Jan 23, 2015 4:37 pm
Daft question ,are you sure it's the front crank seal . I thought mine had gone and it turned out to be a seal on one of the balence shafts the oil was running down and pooling around crank seal
02 animal double cab back on the road after two years in a barn
shogun sport , not much I can say about it really other than it’s slower than the l200 🤷♂️
In hythe kent
- Rob1307
-
Posts: 1.667 Date registered 08.02.2014
RE: 4D56 Front Crank Seal
#6 by
EasyManHugo
, Fri Jan 23, 2015 5:05 pm
Not actually took it apart yet. Just seems to be pooling round the crank like you say. So will let you know as soon as the weather picks up.Thanks
- EasyManHugo
-
Posts: 25 Date registered 10.15.2014
RE: 4D56 Front Crank Seal
#7 by
fatboy
, Fri Jan 23, 2015 5:38 pm
Big Truck
53 plate Animal
Mountain top with 3" roll bar
8" spots on bar
Front over rider with more spots
Decatted
Egr removed
Osram nightbreakers fitted
1 Dead engine
It's Aliveeeeeeeeeeeeeee!
- fatboy
-
Posts: 976 Date registered 11.20.2011
