Wenn Sie hier auf Links zu eBay klicken und einen Kauf tätigen, kann dies dazu führen, dass diese Website eine Provision erhält.

One for the household lectricians here...

Want to put my immersion on a timer currently just on a fused switch outside the airing cupboard Bild entfernt (keine Rechte) and then through to a covered plate inside the airing cupboardBild entfernt (keine Rechte) . This second photo , the wire in the bottom goes directly to the top of the Immersion.

Was looking at buying one of this Werbung: http://www.ebay.co.uk/itm/Immersion-Heat...=item3f2bb5dd5b ....Would this be a direct replacement for the fused switch , and if so is it something I can do......

Wenn Sie hier auf Links zu eBay klicken und einen Kauf tätigen, kann dies dazu führen, dass diese Website eine Provision erhält.

Hi mate.
Yeah you could use that one, but it would go in place of the blank plate with the cable coming out of it going to the tank.

Or you could use this one in place of your spur as it is fused & rated for 3kw.
Werbung: http://www.ebay.co.uk/itm/GREENBROOK-T20...=item1c4e5bb080

Thank you ...so IF I used the first one then I would need to keep the switched spur, but if I used the one you linked to then that does away with switched spur ...That right?

Take it it's not a complicated job to do, just a case of switching the wires/connectors over?

My preference would be an analogue one, far simpler to use & operate, plus it has an manual override on the front of it.

The electronic ones can be a ball ache to operate and set sometimes.

Ps this one goes in place of the blank plate as well, & you just keep the spur switched obviously.

Ah ...ok ..thought a digital one would be easier...LOL! can you suggest an analogue one? and again take it they are easy to fit?

Quote: ronniecabers wrote in post #3

---

Thank you ...so IF I used the first one then I would need to keep the switched spur, but if I used the one you linked to then that does away with switched spur ...That right?

Take it it's not a complicated job to do, just a case of switching the wires/connectors over?

---

Wenn Sie hier auf Links zu eBay klicken und einen Kauf tätigen, kann dies dazu führen, dass diese Website eine Provision erhält.

Quote: ronniecabers wrote in post #5

---

Ah ...ok ..thought a digital one would be easier...LOL! can you suggest an analogue one? and again take it they are easy to fit?

---

Gonna ask as silly question....why would a digital one be harder to program?

you can also get a off peak one that switches with economy 7 tariff

Got a linky to that one @chris07

here you go ronnie http://www.screwfix.com/p/horstmann-econ...imeswitch/44419

Wenn Sie hier auf Links zu eBay klicken und einen Kauf tätigen, kann dies dazu führen, dass diese Website eine Provision erhält.

Quote: ronniecabers wrote in post #8

---

Gonna ask as silly question....why would a digital one be harder to program?

---

I'll agree with the hornmiester here Ronny
I've got a simple digital one at my place start time/stop time/twice/continuous and it's a doddle with just 2 buttons and 2 slide switches
when I have to do my mum's one I need a refresher course in the science of rocket motors before I can program it, I have even cable tied the instructions to it cause without them I'm fooked

And before you order it on Ebay, it's a bit cheaper at one of my wholesalers I use all the time & normally next day free delivery!
Here's the link mate? Plus you don't need an account with them!!

https://www.tlc-direct.co.uk/Products/SMFST24.html