Just had the pleasure of replacing both my 15 year old, 170,000 miles shackles with some lovely new ones with poly bushes,
I've torqued them up to 52nm, but have noticed both the top ones seem to be bulging alot? I've loosened off the top nut to the edge of the thread, but they sill seem to be "squashed"
Any ideas?
Thanks
Posts: | 70 |
Date registered | 07.13.2015 |
Mine looked a bit squashed wen I did em so I took em back out and took a wee bit off with the belt sander. Looked a lot better afterwards.
2005 OM605 superturbo. Borgwarner s200 @3bar ,3” Stainless exhaust, roll bar, TJM winch bumper, winch BJ spacers and extended shackles, snorkel, iron man suspension, LED light bar x3, 2" body lift
Posts: | 3.684 |
Date registered | 10.10.2012 |
I did the same bit trimmed them with a Stanley knife
AREA REPRESENTATIVE: South East England
'PYROCHEF'
Posts: | 34.248 |
Date registered | 02.15.2012 |
Looks like I'm taking them apart this evening then haha, thankyou for the help!
Posts: | 70 |
Date registered | 07.13.2015 |
I trimmed mine down too if that helps ?
SOUTHWEST ENGLAND - AREA REP
2003 4life now sold
2011 walkinshaw , lego mechanic
Posts: | 17.335 |
Date registered | 10.21.2011 |
I actually trimmed mine more on one side as they still bulged a bit left side is still a little bulged but hell its been like it a year or more
AREA REPRESENTATIVE: South East England
'PYROCHEF'
Posts: | 34.248 |
Date registered | 02.15.2012 |
Dumb question, but I take it you trim down the outer part of the bush?
Posts: | 70 |
Date registered | 07.13.2015 |
er I trimmed the inner
AREA REPRESENTATIVE: South East England
'PYROCHEF'
Posts: | 34.248 |
Date registered | 02.15.2012 |
I trimmed down the outer part
SOUTHWEST ENGLAND - AREA REP
2003 4life now sold
2011 walkinshaw , lego mechanic
Posts: | 17.335 |
Date registered | 10.21.2011 |
well we didnt help there did we
AREA REPRESENTATIVE: South East England
'PYROCHEF'
Posts: | 34.248 |
Date registered | 02.15.2012 |
It's okay, i'll trim both sides to keep everyone in the loop!
Posts: | 70 |
Date registered | 07.13.2015 |
I trimmed the inner and the outer. Just to be special.
2005 OM605 superturbo. Borgwarner s200 @3bar ,3” Stainless exhaust, roll bar, TJM winch bumper, winch BJ spacers and extended shackles, snorkel, iron man suspension, LED light bar x3, 2" body lift
Posts: | 3.684 |
Date registered | 10.10.2012 |