Hi all
I have been screwed over by a guy who sold me a MZ330872 hard top which turned up minus the fixing kit.
It has the struts and the strut brackets attached to the top, but no kit to attach to the truck or the door strikers to lock the top?
It also looks as though you need a spacer system fitted at the rear as the new L200 dips at the rear for some reason , I have no bed liner fitted so not sure if you need that as well?
I got this as the stealers sell these trucks minus a tailgate lock and thought a few hundred quid would be money well spent.
Any ideas as I cannot even find out who manufactures the hard top for Mitsubishi?
Gary

got a pic of the top mate? I have some proper clamps in the garage if they are suitable

sounds like that top is for a older shape L200 and you have a newer shape if it dont follow the contours of the truck

Just done a google search for that part number and that's for a Series 5 L200
Is yours a Series 5 or 4?

Hi guys
It is for the series 5 and it fits fine, am going to stealers as they have the same one on there demo model.

How do I add photos, cannot see how?

click "post reply"
bottom of the page "attach file"
"browse" to find photo
"upload"
then click "insert" ........ I usually use "auto"

from what you have said especially this bit "It also looks as though you need a spacer system fitted at the rear as the new L200 dips at the rear for some reason " it sounds like its the wrong top for yours

My friend has the latest shape 2016 l200 with canopy and it is very curved and sleak

Hi all
It is the right top MZ330872
Just some of the fixing parts are missing, they are MZ331073 X 8, which are the fixing clamps and are u shaped aluminium.
Base plate MZ331076 and MZ 331077, which are the base plates to mount the gas struts.
2 x side stopper sets MZ331083, which seem to space out the base plate as it overhangs the edge.
The front gutter MZ331085, which is the spacer bit to seal the rear behind the window.
2 x knob bolt sets MZ331084, not sure what they do but they are there.
These were all on the demo truck that are missing from my top.
If anyone has these?
Regards
Gary

Here is a picture of the top.

Bild entfernt (keine Rechte)

Bild entfernt (keine Rechte) The parts list which is hard to read with a picture of each part

Bild entfernt (keine Rechte)Bild entfernt (keine Rechte)Bild entfernt (keine Rechte)Bild entfernt (keine Rechte)

Better pictures, I forgot I also need the striker set MZ331070.