I have fitted leds for the door handles i got from Lez.
For fitting these this is what i have done.
1/Remove all 4 door cards.1 screw in handle,2 under the switch panel(fronts only),1 screw in door release lever and remove lever and the 3 or 4 screws that can be seen on the door cards.Gently prise the door cards off.
2/Remove the 2 side panels in front footwells
3/Remove sill trims from the 4 door sills.
4/Thread the cable from the led's through the rubber grommits on the front and rear door pillars and pass under the carpet and upto the centre consol under the dash.
5/Remove the 3 sections of the centre consol in order to be able to get to the ciggie lighter wiring.
6/Take all 4 cables and splice the ends off so they can be joined to the live and earth connections.
7/The black wire with white line is to be connected to the green wire on the ciggie lighter as this is live.
8/The all black wire is the earth and i fixed that to the gear shift fixing bolt.
9/Test the lights to make sure everything is working ok and nothing is going to short out.
10/Replace all panels and wit till dark to get the best effect of them.
11/I have also fitted a led in each of the front footwells and joined the wiring from these to the wiring for the door lever led's
Pictures to follow when dark

Pics of led's fitted
Bild entfernt (keine Rechte)Bild entfernt (keine Rechte)Bild entfernt (keine Rechte)

Bild entfernt (keine Rechte)Bild entfernt (keine Rechte)Bild entfernt (keine Rechte)

looks good stormforce.
i might have to get me 4 of those beauties!

Have a chat with Lez as he sent me the handles with the lights fitted and then i sent my own handles back to him ready for the next person

Come in Blue, green, yellow or white...... just let me know and I'll get a set made up for you...

that takes the fun part out of the equasion!

OK they only come in black if the wiring is wrong...

black would look nice

940Nm Infra Red..................or UV

UV.