Quick question for you both, i get the no mic as i havent wired that yet but i also get a compatability with car message?

No, I get the no mic but other than that it works just fine.

Does yours have the surround setting for audio?

Don’t know, where would I look for that?

In the sound setting menu

solved the connection issue it just needed to see the speed signal from the car. I also added the 2 missing canbus wires not present in my loom. the mic has a jc behind the speedo cluster but i found it easier to just join to the existing wire behind the glove box. the small white plug (D-206) does not need plugging in as it just connects to the dab ecu and the mic wires.

solved the connection issue it just needed to see the speed signal from the car. I also added the 2 missing canbus wires not present in my loom. the mic has a jc behind the speedo cluster but i found it easier to just join to the existing wire behind the glove box. the small white plug (D-206) does not need plugging in as it just connects to the dab ecu and the mic wires.

Glad to hear you got it sorted, I haven't had a chance to go out to my L200 to look. so you had to pull out your whole dash to find the wire behind the speedo?? I've not found where the dab euc is...

The dab ecu is infront of your left knee above clutch pedal, I just ran the two wires down below the steering wheel, removed the air bag and theres plenty of access to the loom there, your looking for the green and white wires that are twisted together. Its the only ones in that loom so very easy. they go to the main stereo plug (D-209) pins 3 & 13

Thank you for the info. Sounds a little scary removing the air bag!

I didnt unplug it just unbolted it.

Knowing my luck with such items that would still mean kaboom for me