How do I get the plastic shroud off to change the interior courtesy light bulb (the one in the centre of the roof not the one between the sun visors) ?
I have tried pulling it off & levering it off with a flat blade screw driver.
Is there something I am missing as it feels that if I force it any harder it will break.
headlight
Posts: | 105 |
Date registered | 02.09.2012 |
it just levers off mate lever the end with a flat blade screw driver
AREA REPRESENTATIVE: South East England
'PYROCHEF'
Posts: | 34.244 |
Date registered | 02.15.2012 |
1" in from left n right are where it clips ,just pull and it'll pop off .I just checked mine and its no probs.Justs takes guts the 1st time
FORUM AREA REPRESENTATIVE - Central Scotland
" going where you ain't been"
Posts: | 7.027 |
Date registered | 05.09.2012 |
Yeah it just levers off, the clear bit that is, not the outer plastic bit. It does feel dodgy doing it at first, you think the whole thing is going to snap
2001 4Life, Blue over silver, 80,000+ miles
ARB Winch Bumper, KC Daylighter Spotlights, 2" Body Lift,
EGR Blanked, AVM Free Wheeling hubs, Nautilus Air Horn,
285/75/16 Cooper STT's, Snorkel, Midland 48 Plus Multi CB Radio
Posts: | 1.027 |
Date registered | 11.04.2011 |
Sorry I went for the one between the visors
FORUM AREA REPRESENTATIVE - Central Scotland
" going where you ain't been"
Posts: | 7.027 |
Date registered | 05.09.2012 |