For Sale » Rock Sliders Classic and New Shape

#1 by McK , Wed Nov 12, 2014 10:28 pm

Weld on £175.
Bolt on £195.

These can be bolted by drilling and threading the chassis or by drilling through and using the rear sandwich plates supplied clamping each side of the chassis.
No bolts supplied.

Delivery will be fully insured next day TNT cost 30.

Sliders can be finished flat as side steps profile or up swept off road style.

pm me if interested.

#2 by L200allan ( deleted ) , Wed Nov 12, 2014 10:52 pm

Am defo for a set off these mate when the pennies allow lol.

#3 by Hound Dog , Wed Nov 12, 2014 11:07 pm

Have you any pictures?

#4 by marcosuk , Thu Nov 13, 2014 5:00 am

Bash plates.. cough cough ;)

#5 by AD , Thu Nov 13, 2014 5:20 am

There you go welded these on 2 weeks ago Bild entfernt (keine Rechte)

#6 by 123hotchef , Thu Nov 13, 2014 7:00 am

Quote: Hound Dog wrote in post #3
Have you any pictures?

look at mine again Phill

#7 by AD , Thu Nov 13, 2014 7:33 am

Quote: 123hotchef wrote in post #6
Quote: Hound Dog wrote in post #3
Have you any pictures?

look at mine again Phill

Chef did you put the holes in the bar yourself if so what's the purpose.Mine are from mck but have no holes.??

#8 by Yoda , Thu Nov 13, 2014 10:42 am

This could be incredibly good timing for my paint job. Pm sent.

#9 by StevieV , Thu Nov 13, 2014 10:53 am

Here's mine...... Bild entfernt (keine Rechte)

Bild entfernt (keine Rechte)

#10 by 123hotchef , Thu Nov 13, 2014 11:56 am

Quote: AD wrote in post #7
Quote: 123hotchef wrote in post #6
Quote: Hound Dog wrote in post #3
Have you any pictures?

look at mine again Phill

Chef did you put the holes in the bar yourself if so what's the purpose.Mine are from mck but have no holes.??

the holes are suppose to be for the high lift jack snout brian welded them in

#11 by Antonio , Thu Nov 13, 2014 12:45 pm

Will need some after my 4" lift, as I will have to place them further up, is that right @McK ?

#12 by 123hotchef , Thu Nov 13, 2014 12:50 pm

YOU will probably be at the top of the chassis rails I reakon with 4" dude

#13 by Hound Dog , Thu Nov 13, 2014 4:28 pm

Quote: Hound Dog wrote in post #3
Have you any pictures?

I should have said have you any pictures of the mounts. As could be interested in the bolt on type
@123hotchef I've seen yours at the last meet !

#14 by 123hotchef , Thu Nov 13, 2014 4:29 pm

look in the workshop meet section mate mine were weld on

#15 by McK , Thu Nov 13, 2014 6:59 pm

Quote: Antonio wrote in post #11
Will need some after my 4" lift, as I will have to place them further up, is that right @McK ?

Yep if you fit them then lift the body you will space them from the body. Suspension lift does not matter. You will be fitting them well up the chassis with a 4" body lift. I would weld on as bolt on might not be great at that height as the l200 chassis is not the biggest.

#16 by McK , Thu Nov 13, 2014 7:02 pm

Quote: Hound Dog wrote in post #13
Quote: Hound Dog wrote in post #3
Have you any pictures?

I should have said have you any pictures of the mounts. As could be interested in the bolt on type
@123hotchef I've seen yours at the last meet !

150mm x 75mm x 6mm pre drilled plates welded to the end of the outrigger with matching loose plates for inside on the chassis. This allows fitting with single plate, drill tap bolt, or sandwich plate drill straight through and fit with nut and bolts

#17 by WelshMart , Tue Nov 25, 2014 9:26 pm

I've just fitted my rock sliders the Brian has made, they fitted perfectly and are very well made. I would certainly recommend them to anyone looking to get a set made.

Bild entfernt (keine Rechte)

Thank you again Brian

#18 by Yoda , Tue Nov 25, 2014 9:35 pm

Mine will hopefully be going on with my respray this weekend. Did you get bolt through or weld on ones?

#19 by WelshMart , Tue Nov 25, 2014 9:36 pm

I got weld on ones.

#20 by paul hoolie , Thu Nov 27, 2014 2:17 pm

do they come raw or powder coat interested in new shape set
cheers paul

#21 by WelshMart , Thu Nov 27, 2014 3:19 pm

They are unfinished. I used etch primer and Halford bed liner paint to finish them.

#22 by paul hoolie , Thu Nov 27, 2014 4:01 pm

Are they made to or or does he have any in stock
Cheers paul

#23 by WelshMart , Thu Nov 27, 2014 4:59 pm

Made to order, mine were turned around very quickly but I guess it depends on how busy Brian is. Best message him if you want some to find out. Well worth the money.

#24 by McK , Sun Dec 07, 2014 8:52 pm

Paul,
They will be with you Tuesday.

#25 by paul hoolie , Wed Dec 10, 2014 4:26 pm

would just like a big thankyou to brian for the sliders
they are the bollocks very very well made if any one wants some I would say look no further than this man
they are off to the powder coaters going with a silver to match to arches will fit them over the hols
this mit sound like a simple job to most of to but will take me god no how long to do not that good with cold metal nice warm wood is my thing
but what the hell I can only have ago got to learn somewhere hey

Posts:	553
Date registered	09.09.2012

Posts:	781
Date registered	03.01.2014

Posts:	816
Date registered	01.03.2013

Posts:	4.731
Date registered	04.13.2014

Posts:	34.246
Date registered	02.15.2012

Rock Sliders Classic and New Shape

RE: Rock Sliders Classic and New Shape

RE: Rock Sliders Classic and New Shape

RE: Rock Sliders Classic and New Shape

RE: Rock Sliders Classic and New Shape

RE: Rock Sliders Classic and New Shape

RE: Rock Sliders Classic and New Shape

RE: Rock Sliders Classic and New Shape

RE: Rock Sliders Classic and New Shape

RE: Rock Sliders Classic and New Shape

RE: Rock Sliders Classic and New Shape

RE: Rock Sliders Classic and New Shape

RE: Rock Sliders Classic and New Shape

RE: Rock Sliders Classic and New Shape

RE: Rock Sliders Classic and New Shape

RE: Rock Sliders Classic and New Shape

RE: Rock Sliders Classic and New Shape

RE: Rock Sliders Classic and New Shape

RE: Rock Sliders Classic and New Shape

RE: Rock Sliders Classic and New Shape

RE: Rock Sliders Classic and New Shape

RE: Rock Sliders Classic and New Shape

RE: Rock Sliders Classic and New Shape

RE: Rock Sliders Classic and New Shape

RE: Rock Sliders Classic and New Shape