Very nice Danne,but its a bit low......
FORUM AREA REPRESENTATIVE - North West England
2.8 Import,gone but not forgotten...
The Beast,never to be forgotten...
The Big Silver Beastie,soon to be reborn...
The Frankenfender is on its way....
Posts: | 12.549 |
Date registered | 10.05.2011 |
Dont think I can fit much bigger tyres on it (265/75 -16) and dont want to turn up the front because I want the cw joints to work for a long time
Posts: | 1.924 |
Date registered | 04.22.2012 |
What did you do to your front arches Danne? Quite a tidy mod.
"LS200" - 1UZ V8, auto tiptronic, super select, Upol Raptor paint. Bigger, faster, louder, brighter.
Posts: | 5.855 |
Date registered | 10.16.2011 |
Posts: | 1.924 |
Date registered | 04.22.2012 |
I put on the summer tyres I git with the Pajero when I bought it and f**k, need new tyres
This is why:
Bild entfernt (keine Rechte)
Posts: | 1.924 |
Date registered | 04.22.2012 |
Since the last time I wrote in this thread I have done this to the truck:
Removed all AC components in the engine bay.
Put in a extra oil cooler (from an BMW MC) on the transmission.
By passed the oil cooler in the radiator.
Put in a three gauge pod with boost, water and transmission oil temp.
Removed the old Volt gauge in the original pod and put in a new one.
Made an new exhaust that's ending behind the rear axle. Still no cat or mufflers.
New free wheel hubs.
Change most of the oils.
Led bar:
Bild entfernt (keine Rechte)
Oil cooler behind the old one:
Bild entfernt (keine Rechte)
New exhaust:
Bild entfernt (keine Rechte)
3W led in the bumper and new free wheel hub:
Bild entfernt (keine Rechte)
Gauges:
Bild entfernt (keine Rechte)
Posts: | 1.924 |
Date registered | 04.22.2012 |
Been a busy boy then, looking good mate..
K74 02 plate
Shoggy Sport 3.0 v6
2E0LEZ
Kenwood TS670.. Yaesu FT575GX.. YaesuFT8800D.....Yaesu FT897
Yaese FT101ZD......20M BitX3C TXRX
Kenwood Chef.....Goblin Teasmaid
“If electricity comes from electrons, does morality come from morons”
FORUM MODERATOR...
Posts: | 18.434 |
Date registered | 10.01.2011 |
Still want your temp/heater controls.........LOL!
Thread locking available here...no fee!
Moderator
Posts: | 11.226 |
Date registered | 11.09.2012 |
Thanks LezT
Got all parts for the AC laying around all working if somebody wants them
But the heater control I still need
Posts: | 1.924 |
Date registered | 04.22.2012 |
looks like the inside of a fighter jet in your truck bud ........... I like it
SOUTHWEST ENGLAND - AREA REP
2003 4life now sold
2011 walkinshaw , lego mechanic
Posts: | 17.335 |
Date registered | 10.21.2011 |
Missile switches always make you feel good! I've got some in my cab. Looking you'd Danne. Need to get some Waxoyl or similar on that chassis though.
"LS200" - 1UZ V8, auto tiptronic, super select, Upol Raptor paint. Bigger, faster, louder, brighter.
Posts: | 5.855 |
Date registered | 10.16.2011 |
Are pre installing some switches for a future winch so there going be some more lights and switches on there
These pics are three years old so I am thinking of trying cold-pressed linseed oil instead.
Bild entfernt (keine Rechte)
Posts: | 1.924 |
Date registered | 04.22.2012 |
Some updates have happen again
First as promised, missile buttons
Bild entfernt (keine Rechte)
Second thing I have done is new rear dampers and new mountings that's sitting about two inches higher:
Bild entfernt (keine Rechte)
Third things is that I have changed my gearbox cross member because a hard thing made it look like a V. So to prevent that from happening again and to protect my gearbox I made a skid plate:
Bild entfernt (keine Rechte)
And finally I ordered a set of brake shoes and drums from Milner because the MOT people said rear brakes was bad but when I got them I noticed that the new ones did not have those threaded holes in them that the original ones have so you can remove them in a easy way so two whole was drilled and threaded and some colour on them was painted:
Bild entfernt (keine Rechte)
And that is how far I have come to this point.
Posts: | 1.924 |
Date registered | 04.22.2012 |
Sweet as usual, liking the buttons
2003 warrior RIP Monday 10th February 2014
2001 trojan green over silver, 30mm wheel spacers, all terrains, side steps removed, egr blanked, air con unit, rad and tension plate removed.
Trojan died the ole bitch, driving a Peugeot 406 now ffs
Posts: | 2.987 |
Date registered | 09.07.2012 |
Looking good there Danne.....
FORUM AREA REPRESENTATIVE - North West England
2.8 Import,gone but not forgotten...
The Beast,never to be forgotten...
The Big Silver Beastie,soon to be reborn...
The Frankenfender is on its way....
Posts: | 12.549 |
Date registered | 10.05.2011 |
As it appears some people here actually miss me so I feel that I have to do a small update.
Earlier this year I bought my self a motor home as I needed somewhere to live when out playing or competing but somehow my family thought it was a family thing so I had to go on a lot of miles with them instead for off roading.
So this year it has only been three playtimes and one Challange and no mods what so ever
Motor home
Bild entfernt (keine Rechte)
Playtime
Bild entfernt (keine Rechte)
Bild entfernt (keine Rechte)
Small video on facebook filmed by a friend:
https://www.facebook.com/johan.gunnarsso...204122352246972
Dont know if it works for you :/
Posts: | 1.924 |
Date registered | 04.22.2012 |
welcome back dont leave it so long next time mate
AREA REPRESENTATIVE: South East England
'PYROCHEF'
Posts: | 34.246 |
Date registered | 02.15.2012 |
Posts: | 1.924 |
Date registered | 04.22.2012 |
Looking very nice good work
2000 4/Life Blue/Silver 102000 miles
Fitted Bonnet Struts
New Clutch Fitted
At the moment now got a Saab not no more
And now I have got a Warrior
Posts: | 3.490 |
Date registered | 10.29.2011 |