hungry yummmmmmmm

I've got some treacle and coconut oat biscuits

r they the ones for horses

Nope they are all mine

greedy guts

I don't even have a horse

u can feed mine

Today I changed the red LED in the back of one of my spots that Dan and Alan pointed out was flickering when I was at Kirton. Also did a bodge repair with a couple of washers in the spot bracket that had cracked and was causing one of the other ones to wobble.

Today i bought this Bild entfernt (keine Rechte)and finished off undersealing the chassisBild entfernt (keine Rechte)and sanded the front bumper down to repaint Bild entfernt (keine Rechte)then it got dark and the wench told me i had to come in the pic for the chassis was a half done pic

to day i finished off the electrics, and connected fuel pipes up on my veg oil kit. few air leaks but replacing jubilee clips for fuel clips and that seems to have worked for now.
truck started ok. however any faults in the system it defaults to diesel.tried it on veg oil and derv and not sure if it is running on veg, it did smell like it was but that could be
residue in pump. the supply 3 way sov links to the return 3 way valves and i do not see any thing in the clear pipe used as it goes from supply to return it goes through a therm heater (heater plug) so i would imagine i would see veg oil in pipe, all so the return valve electric plug does not have a red led light up like the supply so may be no power to it. will check tomorrow.also need to fit return loop on derv system. all in all i think i am at least half way there. my biggest mistake was as being busy i have just done little bits when had the time, then forgot what and how i did it. i still have a 50/50 mix in main tank so not on pure oil at moment. but at least truck is running and can take time to fault find. its been a struggle for me but i have enjoyed the tinkering. thanks to all members that have helped me out on this one. garry.

Well done mate

Well done and keep us updated,I'm hoping to fit a kit over the winter

Good work mate,as said,keep us posted...

BeforeBild entfernt (keine Rechte)middleBild entfernt (keine Rechte)there's no After coz i ran out of filler and primer so a trip to halfrauds tomoz

come on ollies wouldnt happen at work would it!

Quote: chaldon3 wrote in post #710

---

to day i finished off the electrics, and connected fuel pipes up on my veg oil kit. few air leaks but replacing jubilee clips for fuel clips and that seems to have worked for now.
truck started ok. however any faults in the system it defaults to diesel.tried it on veg oil and derv and not sure if it is running on veg, it did smell like it was but that could be
residue in pump. the supply 3 way sov links to the return 3 way valves and i do not see any thing in the clear pipe used as it goes from supply to return it goes through a therm heater (heater plug) so i would imagine i would see veg oil in pipe, all so the return valve electric plug does not have a red led light up like the supply so may be no power to it. will check tomorrow.also need to fit return loop on derv system. all in all i think i am at least half way there. my biggest mistake was as being busy i have just done little bits when had the time, then forgot what and how i did it. i still have a 50/50 mix in main tank so not on pure oil at moment. but at least truck is running and can take time to fault find. its been a struggle for me but i have enjoyed the tinkering. thanks to all members that have helped me out on this one. garry.

---

Quote: 123hotchef wrote in post #715

---

come on ollies wouldnt happen at work would it!

---

bet ya canie wait mate

im like a magpie mate shiny things

lol i know the feeling mate

Looking good

Its getting there mate

Wenn Sie hier auf Links zu eBay klicken und einen Kauf tätigen, kann dies dazu führen, dass diese Website eine Provision erhält.

Well today I fitted a reversing camera with a LCD screen in the mirror for £27 it's not half bad, this one below.

Werbung: http://www.ebay.co.uk/itm/281415332822?_...K%3AMEBIDX%3AIT

I have yet to get the camera just perfect but after snapping two drill bits and cutting a finger doing a simple job the cable ties came out and are holding it in place. Does anyone know the best place for the wire from the camera to enter the cab?

u got a pram aint ya?

Quote: 123hotchef wrote in post #724

---

u got a pram aint ya?

---