Quote: Baza wrote in post #996

---

Fitted a stainless steel rear bumper to my Challenger yesterday, to replace the black original equipment under body one . First thing I've done to the truck and was pleasantly surprised how solid all the fitments were. Might have to buy a heftier toolkit though

Next on the agenda is a reversing camera so I don't have to keep asking the Mrs to jump out and see me back at Tescos. Today it's a good clean and polish before settling down to watch Grand Prix qualifying

---

Fitted a canopy!

Blown the tyres up. Last done before Coast to Coast meet,checked spare only ten bar in it.Good job i checked it.

Checked the oil and water and fitted a drop plate , was going to wash off the dead bugs but can't be bothered

Drop plate for the front diff ? if.So hard to do? Is there a kit as my cv has split again did it last month I think

rotors and pads today, nice easy job.

DG

Drop plate for tow bar , free wheel hubs save the gaiters when in 2wd

Gonn. Have to get some I think my fuel leak might have killed it quicker tho

Took the canopy off
https://www.dropbox.com/s/s6le6700bcns19...095419.jpg?dl=0
tub liner back in, cut holes for the brackets, then lowered the canopy back on and did the clips up....no injuries , result!

Did the canopy door close this time Basil??

Yes Ron, Nick said to move it back a tad as he had the same issue. I've sussed the canopy changing issues, all you need is rope, a big snatch block, a quad, and a 70ft pine tree!
oh , and a ladder!

Quote: Basil wrote in post #1011

---

Yes Ron, Nick said to move it back a tad as he had the same issue. I've sussed the canopy changing issues, all you need is rope, a big snatch block, a quad, and a 70ft pine tree!
oh , a ladder and a plaster!

---

Renewed fuel lines Bild entfernt (keine Rechte)stack pipes were a little corroded but got there in the end no more fuel leak

fixed the amber flashy light that was out, fixed the marker light in the spots, fixed the mirror indicator,manually adjusted the headlights down as they were a bit high even on the lowest setting

Fixed my sidelight that was out....

Went over to see marf at lutterworth. He fitted rear sensors for me and an external power supply in the rear pick up flat back bit. He tried to upgrade my central locking to be remote locking but apparently the kit is faulty....Bummer!!...... First time ive met him. Top bloke.

Stripped the EGR out and blanked Nice new water pipe and all good
And new head light bulbs what a pain could not get my hands in stripped head lights out job done

Cleaned it, checked the levels and tyre pressures.

Should be pic of snorkel

washed disco and pug, look nice, forgotton what they look like shiney!! Disco in tomorrow for manifold gasket, front discs/pads, oil change and sort the wiper stalk out. Can't be ar***ed to do it . too much going on. Next step will be a snorkel, front bumper,sump guard, diff guards,and light guards! ( I will do that!!)

busy day today had enough of l200s.
had to put a engine back into one in work i took out last week, i got mine motd in work got a pass =]
got home replaced my ider arm and arb bushes.
what a basterd them outter bushes are they dont line up at all. couldnt undo the drop link bolts need more extensions lol

TOP TIP: when changing the outter arb bushes you will notice they are miles out and look like they will never fit.
#lube it up, line it up, get it close as poss.
#get a g-clamp or long nose mole grips like i used.
#hook the bush clamp/shell/case whatever, line it up and you will have a short bolt and mine were like 1"+ away from meeting.(never gonna start the bolt.)
# clamp the bush clamp with your molegrips, leave it for a minute, release them tighten them up then clamp it again, repeat this step till the holes line up good enough but you will still have a massive gap.
#get a long m8 bolt and start it and pull the clamp all the way home. now get your vise grips and clamp it shut.
#remove the long m8 bolt as its held shut by the molegrips and fit the proper one that came out, job done.
hope this may help someone.

copy and paste that into a how too mate,

u need about a meter extension to get at them drop links from above mate

i have little trouble help me with mine she gripped them whilst I nipped them up

would you call the bush clamps , clamps ?
i worded that with too many clamps haha